Skip to content


E1QX ethernet enabled temperature and humidity measuring device


E1QX is a power over ethernet enabled device which uses digitally calibrated environment sensors to measure temperature and humidity of air and report this information using HTTP web page.

Mechanical information

The device is designed in 125x100x35mm white ABS plastic case.

Technical parameters

Model version E1QX_rev2
Power IEEE 802.3af PoE standard;
built-in short-circuit output protection;
build-in thermal protection
Operation environment -10 to +50 °C of ambient temperature
Networking 10Base-T RJ45 connector using IPv4 using static IP address
or using DHCP for dynamic address allocation
Probes Factory calibrated.
Typical accuracy of 3 %RH for humidity and 0.3 °C For temperature.
Resolution: 1%RH and 0.01 °C
Information access JSON format using HTTP GET request.

Weight and dimensions

Weight ex. battery:

Dimensions in [mm]: 125x100x35


How to connect to a device - see this link.

Label information

Information included on the label:

  • Device type
  • Password
  • MAC address
  • IP address
  • Manufacturer

How to order

Order shall contain the following information:

  • Date and internal number of the order
  • Name and address (including VAT number where appropriate)
  • Number of units and requested delivery date
  • Type of delivery


Devices are appropriately packed individually into padded cartons.

The packaging includes all information required for proper use and servicing of the equipment.


The device can be install on various surfaces, using two screws or double-sided tape.


For support please contact your distributor or manufacturer directly via